One of the most difficult areas to lose stubborn fat are the arms. For this issue, there are few treatments that can match the results of CoolSculpting for Arms. Sometimes, hours of diet and exercise just won’t cut it. Attempting to “spot-reduce” fat from the arm with dumbbell workouts or additional upper body exercises generally does very little.
CoolSculpting for arms is a cutting-edge method of permanently eliminating fat cells from the body, all without a single incision. CoolSculpting for the Arms applies controlled cold temperatures to unwanted stores of fat, achieving a slimmer, more toned appearance in the upper arms. CoolSculpting is a proven, highly effective way to eliminate fat and create slimmer, healthier arms.
Say hello to arms you’ll love! If you are interested in toning your arms with CoolSculpting, we invite you to call Korman Plastic Surgery to schedule your private consultation today.
- 1 What is CoolSculpting?
- 2 CoolSculpt for Arms
- 3 Why Choose CoolSculpt for Arms?
- 4 Candidates for CoolSculpting for Arms
- 5 Dr. Joshua Korman – Top CoolSculpting Expert
- 6 Treatment
- 7 Results
- 8 Cost of CoolSculpting for Arms
- 9 FAQS
What is CoolSculpting?
CoolSculpting is an FDA-approved method of eliminating fat from targeted areas of the body. The procedure is completely non-invasive, comfortable, and can be completed in less than an hour.
Patients can return to work immediately following their CoolSculpting treatment: zero downtime is required!
The body will eliminate the fat cells from the treatment area through natural processes over the weeks following the CoolSculpting treatment.
CoolSculpting is a body sculpting solution against fat that refuses to respond to diet and exercise.
CoolSculpting eliminates fat through a process known as “cryolipolysis.” Cryolipolysis refers to the act of exposing fat cells to controlled, extremely cold temperatures. Fat cells have proven to “die” and break apart when exposed to certain degrees of cold. During a CoolSculpting treatment, an applicator that is designed to treat a specific area of the body will be applied to the skin. The applicator will suction to the skin, guaranteeing accuracy.
Cryolipolysis treatment should not be used in place of a diet and exercise.
Cold temperatures will be applied to the treatment area, while the surrounding skin will be heated to a comfortable temperature. CoolSculpting eliminates 20-30% of fat cells in the treatment area while leaving the skin and tissue in the area unharmed. Most patients see their best, slimmest results after multiple CoolSculpting treatment sessions. CoolSculpting is not a weight loss solution, but it can certainly help patients get rid of fat that is concealing an otherwise healthy body.
CoolSculpt for Arms
No downtime is required!
A CoolSculpting treatment for the Arms will target and reduce the stubborn pockets of fat on the upper arms. Dr. Korman tailors each CoolSculpting treatment to the patient’s body and unique cosmetic goals. The CoolSculpting device has an applicator designed especially for the arms. Depending on the patient’s case, some patients may receive a single large applicator on the treatment area, or be treated by two smaller applicators.
Unlike many other body sculpting procedures, CoolSculpting is particularly convenient: patients can receive CoolSculpting on both arms, simultaneously in the same session!
Patients are able to receive their next CoolSculpting treatment within weeks of their first session.
Once the applicator has been placed on the skin, the CoolSculpting applicator will administer controlled, cold temperatures to the arms. The applicator will keep the surrounding skin comfortable during the treatment. Patients will be able to return to their usual schedules immediately after their CoolSculpting for Arms. The body will naturally dispose of the destroyed fat cells over the weeks following the CoolSculpting. Patients will notice improvements after three weeks and continue to see a reduction in the fat on their arms for two to six months after the treatment. Most patients receive three to four CoolSculpting sessions to achieve the ideal, slim appearance of their arms.
Why Choose CoolSculpt for Arms?
Patients today have a wide variety of body sculpting and fat reduction methods to choose from, but they are not all the same. CoolSculpting for Arms stands out from the competition for the following reasons:
Unlike liposuction, laser-assisted or RF-assisted fat-reducing treatments, and injectable fat-destroyers, CoolSculpting is 100% non-invasive and 100% non-surgical. This means the treatment and recovery are as comfortable as possible, while still achieving great results.
CoolSculpting is a very comfortable experience, from start to finish. The applicator will not affect tissue surrounding the treatment so that the patient stays comfortable while the treatment area receives the cooling effect.
A CoolSculpting treatment can be completed in less than forty minutes! Patients are free to return to their daily schedule immediately following their treatment.
CoolSculpting has proven itself time and again: the results are real! This FDA-approved treatment reduces on average 20-30% of fat from a treatment area per session.
Most patients decide to receive at least three CoolSculpting sessions on their Arms to see their slim, ideal results. In general, the more CoolSculpting treatments a patient decides to receive, the more they will save on their CoolSculpting treatment plan at Korman Plastic Surgery!
Candidates for CoolSculpting for Arms
Good candidates for CoolSculpting for Arms are those who are in overall healthy shape and who want to see a reduction in the fat on their arms. Ideal candidates are those who have previously tried to lose this weight with diet and exercise, but who have not had luck burning off this stubborn arm fat. Candidates should be in overall good health and free of pre-existing conditions that interfere with their body’s immune system or healthy healing. Candidates for CoolSculpting for Arms will have realistic expectations for the outcomes achievable with any cosmetic procedure.
CoolSculpting will address unwanted stores of fat on the arms. Patients who have excess, sagging skin on their arms may want to consider additional treatments to tighten or remove this skin to achieve the ideal tight, sculpted appearance of the arms.
If you are interested in eliminating the fat from your arms but don’t want to go through the recovery that follows surgical fat elimination procedures, CoolSculpting can be the perfect, convenient body sculpting solution you’ve been waiting for!
Dr. Joshua Korman – Top CoolSculpting Expert
Bring any questions you may have about CoolSculpting for Arms with you to your consultation with Dr. Korman.
Dr. Korman makes sure that every consultation at Korman Plastic Surgery is informative and aims to understand your goals so he can tailor your treatment to your personal and physical needs. Dr. Korman will examine your Arms and go over your medical history with you.
We want you to feel confident and well-informed about your treatment choices.
Once he has determined your candidacy for CoolSculpting for Arms, he will work with you to create a treatment plan that will best achieve your goals. If he believes your desired outcomes will be accomplished with an alternative fat-elimination procedure, he will share his professional opinion with you. Photos may also be taken to help Dr. Korman create your CoolSculpting treatment plan and to track your progress.
Ready for slimmer, slender arms? Call Korman Plastic Surgery for your private consultation and learn more about CoolSculpting’s amazing results today!
At the beginning of your CoolSculpting for Arms treatment, a gel will be applied to the upper arms. Next, the CoolSculpting applicator will be applied on your arms, per the treatment plan you and Dr. Korman created together. The applicator will suction your skin closer to its cooling panels, guaranteeing accurate and even distribution of the cold temperatures on the treatment area(s).
Over the next 35 minutes, the applicator will carefully administer precise temperatures between 39 to 41 Fahrenheit to the arms. The applicator will keep the surrounding tissues warm to keep the patient comfortable. Once the 35 minutes is complete, the patient will receive a vigorous massage on their arms, which will improve the outcomes of the CoolSculpting.
Patients are able to return to their daily activities right after receiving CoolSculpting for Arms. No downtime will be required.
The results of CoolSculpting for Arms will become visible within three weeks of the CoolSculpting session.
Your arms will continue to slim down over the next two to six months as the body disposes of the destroyed fat cells through natural processes.
Patients can receive additional CoolSculpting treatments within weeks of their initial session.
Cost of CoolSculpting for Arms
The cost of a CoolSculpting for Arms in Mountain View, California will depend on the details of the patient’s CoolSculpting treatment plan, such as the treatment area and the number of treatments the patient will receive. Once you have completed your consultation with Dr. Korman, you will receive a cost breakdown that reflects the details of your individualized treatment plan.
What is the recovery like after CoolSculpting for Arms?
No downtime is required after a CoolSculpting for Arms treatment. Patients will be able to return to work or their usual daily schedule immediately after their treatment.
Side effects from CoolSculpting are rare and will not impede the patient’s ability to complete their usual tasks. Bruising is rare and will subside shortly after the treatment. The skin in the treatment area may feel tight, but this will also subside.
Does CoolSculpting hurt?
Patients describe CoolSculpting as a cooling followed by a numbing sensation. Some patients find the cooling creates a stinging sensation, but overall patients report that any discomfort is manageable. The warming of the surrounding area keeps patients comfortable and non-targeted tissues untouched, for a comfortable experience and preferred sculpting outcomes.
Can I receive CoolSculpting in two spots at once?
Patients can receive dual treatments at the same time! This makes CoolSculpting a great option for reducing fat on both Arms at once, in less than an hour. Patients can also receive dual treatments like CoolSculpting for “Muffin Top” and Arms at the same time.
CoolSculpting(R) is FDA-cleared to treat visible fat bulges in 9 areas of the body. Some common side effects include temporary numbness, discomfort, and swelling.